We wanted to make sure we had this on the Actual Blog for all of you as well. Make sure that even while you are getting physically fit for your hunt, that you are also getting “skills fit” too. We often think of ourselves as experts and then don’t practice. In order to be an Expert you must practice, practice, PRACTICE!!
August 20, 2015
Preseason Shooting Drills: Trigger Control and Form for Hunters
by John B. Snow
Okay, maggots, listen up. Big game firearms seasons are right around the corner and you are in pathetic shape. Pathetic!But I’m going to take mercy on your slimy souls and turn you from bullet-spraying morons into deer slaying Carlos Hathcocks no matter what it takes.
So here is the first post in a series of weekly drills you can do to live up to the promise of “one shot, one kill” this season.
Any strong structure requires a solid foundation and that’s just as true with rifle marksmanship as it is with architecture, so that’s where we’ll begin.This first week we’ll focus on dry firing skills to get your form in shape. Take turns dry firing from the prone, sitting, and kneeling positions. There are multiple variations for each position, but they all have key elements in common.
1. Be relaxed
Any good shooting position is a relaxed position, free of muscle tension. If you’ve set up correctly, your crosshairs should be drifting right around your target. Doing this means you’ve established correct Natural Point of Aim (NPA).To check your NPA, get into position and get your sights on target. Close your eyes, take a deep breath and then open them. If your crosshairs haven’t moved, your NPA is solid. If not, make minor adjustments to your position and recheck your NPA.
2. Avoid bone-on-bone
While building your shooting position you want to avoid bone-on-bone contact. This is especially relevant while shooting from the seated or kneeling stance. Don’t place your bony elbow on top of your bony kneecap. Instead, scoot your elbows forward so that your kneecaps are pressing into your arms in the fleshy bit between your elbow and triceps.
3. Line everything up
Rifles are heavy. So it is critical that your bones and not your muscles are supporting that weight. Whether shooting prone, kneeling or off-hand, your support elbow (and in the case of kneeling your knee as well) should be positioned right underneath that weight so that an imaginary line going from the rifle directly into the ground passes through the elbow.While shooting prone, you also want your shoulders square behind the rifle so that a line drawn between your shoulders is at 90 degrees to the rifle. This allows the rifle to recoil straight back into your body and will improve accuracy and keep your sights on target.
4. Key on the trigger
A perfect shooting position is for naught if your trigger control is sloppy. You want to have the pad of your finger lined up perfectly straight across the face of the trigger and control the muscles in your hand so that you’re moving the trigger in a straight line toward the rear of the rifle. Really focus on putting even pressure on the trigger—you don’t want your finger to push or pull the trigger to the side when shooting.
Practice these principals with an empty gun and dry fire to your heart’s content. Next week, we talk about how to properly zero your rifle.
As we get closer to our annual backcountry hunt we also want to spotlight certain products that we believe in and use regularly.
Leupold® Introduces Redesigned Gold Ring™ Spotting Scopes
BEAVERTON, Ore. — Leupold & Stevens, Inc. has redesigned the legendary Gold Ring™ Spotting Scope line, offering enhanced ruggedness, a new industrial design and a reticle matched to the company’s riflescope offerings.
With a reputation of ruggedness, reliability, and lightweight construction, Gold Ring Spotting Scopes deliver unsurpassed optical quality. The new line of Gold Ring Spotting Scopes continues that lineage throughout the entire line.
New for the Gold Ring Spotting Scope is the addition of the Impact Reticle™ in the 12-40x60mm HD and the 20-60x80mm models. This MOA-based, front focal plane reticle allows guides or spotters to call impacts and offer immediate corrections. A minute-of-angle based grid set in the lower half of the viewing field allows for fast and accurate measurements at any magnification. Additional milradian dots allow the Impact reticle to be used with mil-based reticles as well.
The combination of an MOA reticle in the spotting scope and matching adjustments on the riflescope make sighting in a simple, two-shot process. Fire a shot, measure the adjustment using the reticle’s gradiations, dial in the adjustment and fire the second to confirm.
“Spotting scopes are one of the most important tools in the hunter’s pack,” said Pat Mundy, director of brand communications for Leupold & Stevens, Inc. “A good spotter helps the hunter scout longer and the wider field-of-view can help locate and identify animals otherwise missed.”
A new armor coating offers protection in the field, while the prism-less Folded Light Path system significantly reduces the overall length, making the Gold Ring a great option for back country hunts or anywhere else space is at a premium.
Designed, machined and assembled in Leupold’s Oregon manufacturing facility, the Gold Ring Spotting Scope is completely backed by the Leupold Gold Ring™ Full Lifetime Guarantee
Founded in Oregon more than a century ago, Leupold & Stevens, Inc. is a fifth generation, family owned company that designs, machines and assembles its riflescopes, mounting systems and tactical/Gold Ring™ spotting scopes in the USA. The product lines include rifle, handgun and spotting scopes; binoculars; rangefinders; mounting systems; and optical tools and accessories.
Leupold & Stevens, Inc., P.O. Box 688, Beaverton, OR 97075-0688, U.S.A.
Phone: (800) LEUPOLD or (503) 526-1400 • Fax: (503) 352-7621 • www.leupold.com